SL 2 SLIDING KEY

SL2 Slide Switch, with 7 + 7 mm slide travel and a three-position (0-I-II) operating functions, used for selecting settings in white goods, small household appliances, and industrial equipment; it is a slide switch that is mounted by soldering to a printed circuit board.

The SL2 Slider Switch is a three-position switch with body dimensions of 14.9 x 12.7 mm that operates via a horizontally moving slider mechanism. The slide, which rises 4 mm from the body and is 5.8 mm wide, provides the 0-I-II function with a two-step movement, each step being 7 mm. The product is mounted directly onto the printed circuit board using solder terminals with a cross-section of 1.2 x 0.8 mm and a length of 4 mm; this design offers a compact solution for control boards where two different positions must be selected using a single switch.

The SL2 Slide Switch has a switching capacity of 8 A resistive and 3 A inductive (motor) loads at 250 V AC, a T125/55 temperature class, and a mechanical life of 10,000 operating cycles. The contacts are designed to provide complete isolation; the product is suitable for use in Class II equipment with a 2,500 V impulse withstand voltage, PD2 pollution degree, and Group IIIa insulation material rated for 250 V tracking resistance. The IP20 protection rating provides protection against solid objects. The thermoplastic housing and actuator design make the SL2 a reliable control element for home appliances, heating and ventilation equipment, and industrial equipment requiring three-position switching.

The SL2 Slide Switch is designed for high-temperature applications, with a glow wire temperature of 850 °C and a temperature class of 125 °C. Its three-position design maintains a fully isolated contact configuration.

The product has undergone type testing in accordance with the EN 61058-1-1:2016 and EN IEC 61058-1:2018 standards and holds KEMA-KEUR certificate No. 71-124812 issued by DEKRA. No ignition was observed in the 850 °C and 750 °C glowing wire tests, a 2500 V impulse withstand voltage, and a T125/55 temperature class, meet the safety criteria required for integration into unattended household appliances covered by EN 60335-1.

GENERAL FEATURES
Product Name Sliding Key SL2
Category Solder Tip / PCB Terminal
Number of Positions 3 Positions
Operating Function 0-I-II
Electrical Ratings 8(3) A / 250 V AC
Switched Load Resistive / Motor
Temperature T125/55
Mechanical Life 10,000
Protection Class IP20
Glow Wire Temperature (GWIT) 850 °C / 750 °C
Dielectric Withstand Voltage 2500 V
Contamination Level PD2
Contact Opening Full Disconnection
Circuit Code 1.3
Housing Dimensions 14.9 x 12.7 x 30 mm
Slider Dimensions 5.8 mm / 4 mm Height
Slider Travel 7 + 7 mm
Terminal Type 1.2 x 0.8 mm PCB Solder Terminal
Terminal Length 4 mm
Our Similar Products
SL 3 SLIDING KEY
SL 3 SLIDING KEY
Slide Switches
SLIDE KEY SL 1
SLIDE KEY SL 1
Slide Switches